English
DFSHOU irrigation micro sprinklers are designed for growers and irrigation-system buyers who need gentle, dependable water distribution over a defined area. Compared with point-source drippers, a micro sprinkler creates a wider wetted pattern, making it a practical choice where crops, containers, root zones, or local climate conditions benefit from distributed spray coverage.
Our micro sprinkler range includes rotary sprinklers, refracted atomizing sprinklers, and misting sprinklers for greenhouse, nursery, orchard, seedling, and landscape applications. Available flow rates range from 24 L/h to more than 400 L/h, with spray radii from 0.8 m to 4.8 m. Color-coded nozzles help installers identify flow options during installation and maintenance.
Whether you are building a new micro sprinkler irrigation system or upgrading an existing low-pressure network, DFSHOU can help you match sprinkler heads, filtration, pipework, valves, and control requirements to the application.
Contact DFSHOU to discuss micro sprinkler selection, OEM requirements, or a complete irrigation solution.
Rotary micro sprinklers use a rotating component to distribute water in a circular pattern. They are commonly selected where uniform coverage is required across benches, containers, planting rows, or localized orchard zones. Their wider spray pattern can reduce the number of irrigation points needed in suitable layouts.
Atomizing micro sprinkler heads break water into finer droplets for gentle coverage. They are suitable for applications such as seedling irrigation, greenhouse cooling, humidity management, and sensitive crop areas where a harsh spray pattern is undesirable. The appropriate droplet size, mounting height, and operating pressure should be selected according to the crop and growing environment.
Misting sprinklers are used where fine water distribution supports greenhouse climate management, propagation, and cooling applications. Because humidity and leaf wetness can affect crop health, misting systems should be designed around the specific crop, ventilation conditions, run time, and local climate.
For overhead greenhouse installations, anti-drip models can help prevent residual water from dripping after the system shuts off. This is especially useful where hanging lines are installed above plants, benches, or walkways and a cleaner shutdown is required.
The best micro sprinkler is not simply the model with the largest radius or highest flow. Buyers should match the sprinkler pattern to crop spacing, mounting method, water quality, operating pressure, and irrigation objective.
| Selection Factor | Why It Matters | Questions to Consider |
|---|---|---|
| Flow Rate | Controls the water delivered by each sprinkler point. | How much water does each crop zone need during one irrigation cycle? |
| Spray Radius and Pattern | Determines overlap, wetted area, and installation spacing. | Is full-circle, partial-circle, or localized coverage required? |
| Installation Position | Affects coverage quality and suitability for the crop. | Will the head be suspended overhead, fitted to a riser, or inserted near ground level? |
| Operating Pressure | Helps maintain the intended spray pattern and distribution. | What pressure is available at the far end of the irrigation line? |
| Water Quality | Fine nozzles need appropriately filtered water for reliable operation. | What particle load, sand content, or organic matter is present in the water source? |
| Crop and Application | Different crops require different water placement and droplet conditions. | Is the goal irrigation, cooling, humidity control, frost protection, or propagation? |
A reliable micro sprinkler irrigation system depends on more than the sprinkler head. The system should be designed as a coordinated network, with suitable water treatment, distribution pipe, pressure management, and automation where required.
Filtration: Select appropriate irrigation filters to protect nozzles from debris and help maintain stable sprinkler performance.
Water distribution: Use correctly sized mainlines, submains, and irrigation pipe to deliver sufficient flow and pressure to each zone.
Control: Add irrigation solenoid valves when automatic zone control, timers, or irrigation controllers are part of the project.
Root-zone irrigation: Combine micro sprinklers with drip emitters where different crop zones require both localized and wider-area irrigation.
Greenhouse micro sprinklers can provide gentle water distribution for seedlings, young plants, propagation benches, and climate-management applications. Upside-down hanging installation is often used where overhead coverage is required, while the final layout should consider bench arrangement, roof height, ventilation, and crop sensitivity.
Micro spray irrigation supports efficient coverage across nursery beds and container-grown plants. Sprinkler spacing and radius should be planned to minimize dry spots while avoiding unnecessary overspray outside the growing area.
In orchards, micro sprinklers can wet a larger soil area around the root zone than a single dripper point. The preferred layout depends on tree age, soil type, row spacing, water availability, and whether the project requires irrigation alone or additional frost-protection capability.
Low-flow micro sprinklers can also be used for landscape irrigation and localized outdoor cooling. Choose the spray type and mounting method according to the target area, wind exposure, pedestrian use, and water-management requirements.
DFSHOU supplies micro sprinklers for professional irrigation projects where product compatibility and practical system design matter. Our range covers rotary, atomizing, and misting options, including overhead and ground-level installation configurations. Buyers can select suitable flow rates, spray radii, and nozzle options for their project requirements.
For a complete solution, share your crop type, planting layout, available pressure, water source, installation method, and target irrigation area. Our team can help identify compatible micro sprinkler heads and supporting irrigation components.
Irrigation micro sprinklers are low-flow sprinkler heads that distribute water over a smaller, controlled area than conventional agricultural sprinklers. They are widely used in greenhouses, nurseries, orchards, seedling areas, and localized landscape irrigation.
Drip emitters deliver water at specific points near the root zone, while micro sprinklers distribute water across a wider area. The best option depends on crop type, soil, planting layout, and the desired wetted pattern. Some projects use both methods in different zones.
Select flow rate based on crop water demand, sprinkler spacing, irrigation duration, available pressure, and total zone flow. A system designer should also confirm that the pump and pipe network can supply the required flow uniformly.
Yes. Certain micro sprinkler models are designed for upside-down greenhouse mounting. This configuration can provide overhead coverage while keeping pipework above benches or crop rows. Use an anti-drip option when a cleaner system shutdown is important.
Yes. Appropriate filtration is important because small nozzle passages can be affected by particles in the irrigation water. Filter selection should be based on the water source, debris type, system flow, and sprinkler nozzle requirement.
Choose a radius that fits the crop layout and allows suitable overlap between sprinklers. Too little overlap can create dry areas, while excessive overlap may waste water or create unwanted leaf wetness.
Suitable atomizing or misting models can support greenhouse cooling and humidity-management applications. The system should be designed carefully around ventilation, crop sensitivity, climate conditions, and operating schedules.
Yes. Contact DFSHOU with your required flow rate, spray pattern, mounting method, application, order quantity, and target market so our team can discuss suitable product and supply options.
Looking for micro sprinkler irrigation heads for a greenhouse, nursery, orchard, or landscape project? Send DFSHOU your technical requirements and application details. We will help you identify a suitable micro spray irrigation solution and compatible system components.
